Medical Equipment Ireland

 

PRESTIGE AUTOCLAVE - 9 l Item 35709 Price € 1125.00

 

 

 

Prestige is one of the world's largest selling and most cost effective automatic autoclave available, with an enviable reputation for reliability, durability, safety and quality. - Lifetime warranty on heating element - Method recommended by healthcare professionals worldwide including the World Health Organisation (WHO). - Each autoclave is computer tested and issued with a unique Performance Test Certificate. - At only 4.5 kg net weight, offers full device portability. - Supplied with basket, tray, lifting fork. Recommended for infection control not only in hospital and general medical and dental surgeries, but also in veterinary, chiropody, professional beauty, tattooists, acupuncture, laboratories and schools. Multilingual user manual. Comply with: IEC 601, DIN 58946, EMC, UL 544, BS3970 part 4, ESCHLE

 

Technical Specifications

• Capacity : 9 l
• Chamber internal dimensions (D/H): 210/236 mm
• Maximum instrument lenght (diagonal): 228 mm
• Maximum loading weight: 3 kg
• Width/height: 340/335 mm
• Sterilizing time: 11 minutes
• Cycle time (nominal) minutes: 22 minutes
• Operating pressure: 1.40 bar
• Sterilizing temperature: 126 °C
• Operating voltage: 230 V - 50-60 Hz
• Power 1.500 Watt
• Made in UK
• Warranty: 1 year

 

NUBYRA AUTOCLAVE - 6 l - 230 V
Item 35647 Price € 2195.00

 

 

 

 

Electronic steam autoclave for the sterilization of unwrapped instruments. 2 fully automatic, microprocessor controlled, sterilization cycles: at 134°C or 121°C with automatic drying. LCD display with visualization of temperature and pressure for total control of sterilization cycle. Easy closure system with double safety sensor. Air pockets automatic ejection system: thermodynamic system for the ejection of “cold” air pockets. Anodized aluminium chamber, 2 electronic temperature sensors (1 inside chamber and 1 outside) and electronic transducer for better control of pressure. Supplied with 3 aluminium trays. Available on request 110 V. • 93/42/EEC Medical device • 73/23/EEC Low tension • 89/336/EEC Electromagnetic • EN 13060 Compatibility

 

Technical Specifications
• Anodized aluminium chamber: ø 17x27 cm - 6.1l • External size: 44 x 45 x h 35 cm • Trays size: - 1 large 15 x 24 x 2 cm - 2 small 11 x 24 x 2 cm • 2 sterilization cycles: 121°C and 134°C • Maximum load: 2 kg • Operating voltage: 230V - 50/60 Hz • Max absorbed power: 1,300 Watt • Net weight: 27 kg Class N • Made in Italy - Warranty: 1 year • User manual: English, Italian, (French, Spanish on request). • Cycle: Not wrapped 121° C • Materials: - Fragile solids - Rubber solids - Glass - Turbines if indicated by producer • Ster. time: 18 min. • Drying time: - 5 min short dry - 15 min long dry • Max Load: 2.1 kg 700 g load in any tray • Working pressure: 1.1÷1.2 bars • Cycle: Not wrapped 134° C • Materials: - Stainless metal solids - Turbines if indicated by producer • Ster. time: 6 min. • Drying time: - 5 min short dry - 15 min long dry • Max Load: 2.1 kg 700 g load in any tray • Working pressure: 2.1÷2.2 bars

 

H100 GIMA AUTOCLAVE - 9 l - 230 V Item 35746 Price € 1395.00

 

This autoclave is safe and easy to use. It is used to sterilize turbines, rotating instruments and all hand-pieces which can be sterilized up to 125°C. All this with a sterilization cycle of 15 minutes. It is formed by an external box of painted steel and a stainless-steel 18/10 body without any welding, it has three safety valves. • Safety systems - Safety lock, which prevents the opening of the door during the sterilization cycle; the door can only be opened when pressure inside the chamber is levelled to the ambient one. - Safety valve for vapour exhaust in case of damage with inside overpressure > 2.5 bar. - Safety thermostat which occurs if the inner temperature of the chamber rises over 135°C. - Thermodynamic vacuum.

 

Technical Specifications
• External size: 258 x 300 x h 370 mm • Size of the sterilizing chamber: Ø 220 mm - h mm 215 • Removable basket: Ø 210 mm - h mm 215 • Sterilizing liquid: distilled water • Absorbed power: 1500 Watts • Operating voltage: 230 V - 50/60 Hz • Fuses: type 6.3 x 32 mm - 8A • Operating temperature: 125 °C • Sterilizing time: 15 minutes • Operational pressure: 1.6/1.7 bars (170/180 KPa)
Standard accessories
• Stainless steel basket • Distilled water bottle 1 l • Rauclair tube • Electric cable • User manual: english, french, spanish, german, Italian

 

HYDRA EVO AUTOCLAVE - 15 l Item 35658 Price € 2895.00

 

 

 

 

 

 

Automatic steam autoclaves for the sterilization of unwrapped instruments. Closure system with an operator safety pivot. Thermodynamic system for the ejecting of the "cool" air locks. • Two sterilization cycles: 121°C and 134°C Automatic phases of pre-heating, sterilization cycle and drying. • Pre-set, non-modificable cycles All cycles are pre-set at the factory and guarantee perfect and safe sterilization of treated materials. There is no way the operator can manipulate or alter the cycles, and this safeguards against risks deriving from human error. • Pre-set temperatures The temperatures set for our autoclave cycles are 134°C and 121°C. The 134°C cycles are normally used for the sterilization of solid and ferrous materials. 121°C cycles are normally used for sterilization of thermoplastic and delicate materials. • Water tank Hydra EVO only has one water tank. This tank must be filled with distilled or demineralized water and acts as a container for collecting the used water which is then re-utilized for new cycles. • Safety on the door Each door is equipped with 2 locks: - a mechanical one which does not open when pressure is exerted - a dynamic one, that operates thanks to a special form of door seal • Safety devices installed - Certified safety valve - PED on sterilization chambers • Controls on the Autoclave - Control of the water that enters into the chamber - Safety Thermostat - Time Control The sterilization chamber is completely stainless steel AISI 304 and it is heated by a band shaped heating element which grants uniformity of the heat. Supplied with four aluminium trays and one key for their extraction. User manual available in English, French, Italian, Spanish. • 93/42/EEC Medical device • 73/23/EEC Low tension • 93/336/EEC Electromagnetic Compatibility

 

Technical Specifications
• Stainless steel chamber: ø 24.5 x 32 cm • External size: 44 x 38 x 50 cm (W x H x D) • Net weight: 35 kg • 2 sterilization cycles: 121°C and 134°C • Operating Voltage: 230 V±10% - 50/60 Hz • Power consumption: 1700 W • Class N • Made in Italy - Warranty: 1 year • Cycle: Not wrapped 121° C • Materials: - Fragile solids - Rubber solids - Glass - Turbines if indicated by producer • Ster. time: 20 min. • Drying time: 5 min • Max Load: 2.8 kg 700 g load in any tray • Working pressure: 1.2÷1.3 bars • Cycle: Not wrapped 134° C • Materials: - Stainless metal solids - Turbines if indicated by producer • Ster. time: 10 min. • Drying time: 5 min • Max Load: 2.8 kg 700 g load in any tray • Working pressure: 2.1÷2.2 bars
TEST FOR AUTOCLAVE AND HOT AIR STERILISATION - dry star
Item 35840 BOX OF 1000 Price € 379.00
Notice "Sterilisé" and two stars drawing change colour from pink to brown to show effectiveness of 160°C - 1 hour or 180°C - 30 minutes or 200°C - 15 minutes sterilization and to black to show safety margin, doubling sterilization time for each temperature. - For hot air sterilization - No special stocking requirements
TEST FOR AUTOCLAVE AND HOT AIR STERILISATION - steam star
Item 35850 BOX OF 1000 Price € 369.00
Notice "Sterilisé" and three stars drawing change colour from pink to brown to show effectiveness of 121°C - 15 minutes or 134°C - 3 minutes and 30" sterilization and to black to show safety margin of 121°C - 20 minutes and 134°C - 5 minutes sterilization. - For hot air sterilization - No special stocking requirements
UPSTAR - "BOWIE & DICK" - test
Item 35853
Bowie & Dick test ready for use. - Stability of colour change. - High sensibility, detect any anomaly - minimum order: box of 30 tests - Satisfactory: green uniform colour - Not Satisfactory: Central red colour, Time and/or temperature and/or steam pressure uncorrect
ANDROMEDA VACUUM XP - 15 l - 230 V AUTOCLAVE WITH PRINTER Item 35651 Price € 5195.00

 

 

 

 

 

 

Completely computerized monitoring of all automatic functions, and auto-diagnosis of each component. The total automation of each phase of the cycle prevents any possible human error, also from inexperienced personnel Timed start, with positioning in “Stand-by” at 80°C and automatic switch off after one hour not in use. Automatic filling up of the water: a pump allows the filling up, and stops automatically when the maximum level is reached. • Pre-and post-vacuum. Andromeda Vacuum is provided with powerful vacuum pump which, at the beginning of the cycle, ejects the airpockets which are into the sterilization chamber, and at the end of the sterilization phase ensures a very good drying. • Rapid preheating A very new method of preheating, through a special band heating element, gives a high reduction of the preheating times. • Guaranteed sterilization A sophisticated electronic device gives a constant monitoring of pressure, temperature and time. In case of anomalies there will be an electronic lock of the autoclave and the display will indicate the anomaly. • “Night” cycle with anti-condensate device Andromeda Vacuum can work also without the operator presence as all functions are automatic. At the end of each cycle a special device eliminates the backwater of condensate, afterwards there is the automatic sign off, but with electronic storage. • Safety of the operator Andromeda Vacuum has an electromagnetic block device on the door. The door opens only with atmospheric pressure into the chamber, and after having pressed the push button. User manual available in English, French, Spanish, Italian, German.
Technical Specifications
• External size: 45 x 39 x 54 cm (W x H x D)
• Chamber dimension: Ø 24.5 x 32 cm depth
• Weight: 50 kg
• Operating Voltage: 110 or 230 V - 50/60 Hz
• Power consumption: 2000 Watt
• Made in Italy
• Class S
• Cycles: Andromeda Vacuum is provided with 5 cycles of sterilization: 121° C and 134° C for unwrapped and wrapped instruments, and a “Flash” cycle for the fast sterilizations. - Program 1 (Unwrapped instruments) - Temperature: 134° C - Max load: 4 Kg - Pressure: 2.2 - Total time*: 33 min - Program 2 (Unwrapped instruments) - Temperature: 134° C - Max load: 4 Kg - Pressure: 2.2 - Total time*: 38 min - Program 3 (Unwrapped instruments) - Temperature: 121° C - Max load: 4 Kg - Pressure: 1.2 - Total time*: 42 - Program 4 (Unwrapped instruments) - Temperature: 121° C - Max load: 4 Kg - Pressure: 1.2 - Total time*: 46 - Program 5 (Flash) - Temperature: 134° C - Max load: 4 Kg - Pressure: 1.2 - Total time*: 16 * pre-heating - vacuum - cycle - drying in vacuum
EUROPA B EVO AUTOCLAVE - 15 l Item 35653 Price € 5795.00

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

P.I.D. REGULATION SYSTEM SPECIAL CONTROL TO MONITOR THE PARAMETERS OF THE STERILIZATION CYCLE

Fractionated Vacuum:
B type fractionated vacuum managed by a double phase vacuum pump to ensure complete evacuation of air. Microprocessor electronic system.
System and Evaluation System Built in:
All functions and controls are managed by an updated microprocessor electronic system.
System of integrated valuation:
An electronic control ensures a self valuation and the management of all functions.
New electronic control:
The control card is integrated in the board to allow temperature settings to be preset, automatic barometric alignment to take place, multifunction graphic display to work and carries the management availability for the integral P.I.D. system.
Safety Door:
The door is equipped with three systems to ensure the operators safety: Dynamic, Electromagnetic, and Electronic. The door will only open when the internal pressure is zero, ensuring the operators safety.

6 Automatic cycles without need of operators presence:
Six automatic sterilization cycles. All equipped with an anticondensation function and automatic cut off.
3 Cycle tests for vacuum check:
Europa B XP has 3 test cycles available: VACUUM TEST, for the air pockets evacuation BOWIE &DICK TEST, for hollow-tools HELIX TEST.
Warranted drying:
The combined vacuum and heat drying cycle ensures that the equipment is totally dry as required.
Stainless steel chamber:
The T-PED certified stainless steel cylinder ensures the heat is uniformly dissipated.
Validating System:
Prearranged validating system of the sterilization cycle.
Water tanks:
A clean water tank and a dirty water tank ensure the best sterilization cycle and enhance working life of equipments
Technical Specifications
• Operating voltage: 230 V - 50/60 Hz
• External size: 510 x 590 x 390 mm
• Weight: 54 Kg
• Max absorbed power: 1700 W
• Chamber dimension: Ø 245 x 320 mm
Cycle: 121°C not packed in bags
• Materials:
- Fragile solids
- Rubber solids
• Ster. time: 52 min.
Cycle: 121°C packed in bags
• Materials:
- Delicate hollow and porous instruments
- Solids instruments
• Ster. time: 60 min.
Cycle: 134°C not packed in bags
• Materials:
- Fragile solids
- Rubber solids
• Ster. time: 42 min.
Cycle: 134°C packed in bags
• Materials:
- Solid instruments
- Hollow and porous instruments
• Ster. time: 50 min.
Cycle: 134°C PRION
• Materials:
- Solid instruments
- Hollow and porous instruments
• Ster. time: 65 min.
Cycle: 134°C POROUS
• Materials:
- Hollow and porous instruments not packed in bag
- Solid instruments not packed in bag
• Ster. time: 58 min.

KRONOS B AUTOCLAVE - 15 l Item 35663 Price € 5995.00

 

 

 

 

 

Fractionated vacuum, managed by high performance doublestage pump, ensures complete evacuation of air. • Motor-operated door closure with triple-protection, guarantees better safety, greater ease of handling and self-regulation of the door. • Instantaneous vaporized outside the chamber allows higher sterilization speed and reduces water consumption. • Thermal printer built into the machine allows complete recording of the sterilization cycle. Ensures the user greater cycle control and easy archiving. • Multi-language graphic display offers to operator easier selection of the sterilization cycles, continuous control over the cycle phases and gives graphic indication of the errors committed by the operator. • Connection to PC. • Thick aluminium chamber giving faster sterilization cycle.

 

Technical Specifications
• Operating voltage: 230V - 50/60 Hz (110V on request) • External size mm: 610 x 505 x 400 • Chamber size mm: 236 x 381.5 • Weight kg: 56 • Wrapped/sterilizable weight kg: 3 • Unwrapped/sterilizable weight kg: 4 • Porous material/sterilizable weight kg: 1 • Max absorbed power: 2400W • Cycle: 121° C Hollow** wrapped • Materials: Delicate hollow and stainless steel hollow (wrapped) • Vacuum phases: 4 • Ster. time: 26 min. ** Type A and B hollow instruments, in accordance with EN13060 • Cycle: 134° C Hollow wrapped • Materials: Stainless steel hollow (wrapped) • Vacuum phases: 4 • Ster. time: 14 min. • Cycle: 121° C Solid wrapped • Materials: Solid rubber and delicate solids (wrapped) • Vacuum phases: 2 • Ster. time: 26min. • Cycle: 134° C Solid wrapped • Materials: Stainless steel solids (wrapped) • Vacuum phases: 2 • Ster. time: 14 min. • Cycle: 134° C Pryon • Materials: Stainless steel solid and hollow (wrapped) • Vacuum phases: 4 • Ster. time: 30 min. • Cycle: 121° C Porous • Materials: Delicate, hollow and porous (wrapped) • Vacuum phases: 4 • Ster. time: 31 min. • Cycle: 134° C Porous • Materials: Solid stainless steel, hollow, and porous (wrapped) • Vacuum phases: 4 • Ster. time: 19 min. • Cycle: 121° C Fast • Materials: Solid rubber and delicate (unwrapped) • Vacuum phases: 2 • Ster. time: 20 min. • Cycle: 134° C Fast • Materials: Solid rubber (unwrapped) • Vacuum phases: 2 • Ster. time: 8 min. • Cycle: 134° C Hollow unwrapped • Materials: Hollow rubber and stainless steel (unwrapped) • Vacuum phases: 4 • Ster. time: 8 min. • Cycle: 134° C Helix/B&D test • Materials: Test cycle for Helix and Bowie & Dick • Vacuum phases: 4 • Ster. time: 7.5 min. • Cycle: <40° C Vacuum test • Materials: Test cycle for vacuum • Vacuum phases: 1 • Ster. time: 15 min.
WATER DISTILLER
Item 35663 Price € 305.00

The autoclaves must run with distilled or demineralised water to avoid problems on electrovalves and on internal mechanism and white traces of limestone on the sterilized tools and devices. Distiller produces 100% distilled water in a cheap and safe way.
It produces 4 litres in about 6 hours. It is equipped with an automatic control thermostat with block system at the end of operation. Supplied with 6 active coal filters, 1 detergent, 1 container for produced distilled water.

 

Technical Specifications
• Operating Voltage: 220 V - 50-60 Hz
• Size: Ø 20 cm x h 36 cm
   
   

 

 

 

 

ContactLogo